P1010009.JPG	Scaffolding surrounds the casework 
P1010011.JPG	Tom and Barry work on the electrical connections
img_1729.jpg	Side view of main frame
P1010020.JPG	Mitred full length pedal reeds
P1010025.JPG	Pipes even in the roof of the swell box to save space!
P1010028.JPG	The tracery window viewed through the swell box
P1010041.JPG	Another view of the tracery looking into the church
P1010043.JPG	The beautiful woodwork enclosing the swell organ
P1010044.JPG	Stop jambs
P1010045.JPG	More stop jambs!
P1010047.JPG	This gives a good view of the cleaned tracery sandwiched between the great and swell organ
P1010049.JPG	Electric stop magnets
P1010057.JPG	Looking down on the new console from the scaffolding
P1010059.JPG	The console coming together
P1010060.JPG	Close up of the casework
P1010064.JPG	Side view of the swell box frame
P1010068.JPG	Electric stop engines
P1010073.JPG	This shows the fine detail of the casework high up near the roof
P1010082.JPG	Tim admires his work on the little TV monitor used for watching the conductor!
P1010087.JPG	Tim and Tom from Tickells
P1010096.JPG	The mouths of the big Sub-bass
organ1.jpg	Close up of mitred reeds
organ2.jpg	The upper notes of the pedal Sub-bass on either side of the swell box
organ3.jpg	Kopex piping running wind to pies in the swell box roof
P1010009-2.JPG	Fitting the mounted cornet pipes; yhe white protective wrappers are still in place
PC180022.JPG	The beginnings of the playing console in the workshop
PC180023.JPG	The holes for the stop jambs
P2100036.JPG	Gold leaf on the front pipes
P2100038.JPG	Front pipes in place with protective covering
P1010047-2.JPG	The mechanical tracker action behind the music stand
P1010093_edited.JPG	A view of the pedal area and swell box control
img_5153.jpg	Gold leaf being applied to the front pipes
img_5156.jpg	It's beginning to look like an organ!
img_5159.jpg	A rank of pipes in the voicing room
img_5161.jpg	A good view of the skeleton casework in the factory
img_5162.jpg	Voicing the pipes
P1010014_edited.JPG	A close up of one of the soundboards
P2080028.JPG	Fitting the front pipes in the casework
P1010002.JPG	The 'boots' of the sixteen foot pedal reed
P1010005.JPG	The lower pedal Sub-bass pipes in the main case
ximgp3944.jpg	Completed instrument in April 2007
imgp3610.jpg	Kempe's east window during assembly in February 2007
imgp3617.jpg	Scaffolding in February 2007
imgp3623.jpg	Assembling the casework, February 2007